Hydraulic Symmetrical 3-Roller Rolling Machine

Home » Products » Rolling Machine » Three Roller Rolling Machine » Hydraulic Symmetrical 3-Roller Rolling Machine
Hydraulic Symmetrical 3-Roller Rolling Machine

The W11NC series of equipment of our company is hydraulic up-adjusting symmetrical 3-roller rolling machine. Through hydraulic oil in hydraulic cylinder acting on the piston, the upper roller can move up and down along the center symmetrical position of the two lower rollers. The moving mode of the two lower rollers is rotating. Through the meshing of the output gear of speed reducer and the gear of lower roller, the torque is created to roll the steel plate. The shortage of the equipment is that the pre-bending for end of plate needs to be finished by other equipment.

Technical Parameters
Model Max. Thickness of Steel Plate for Rolling (mm)Max. Width of Steel Plate for Rolling (mm) Yield Limit of Steel Plate (MPa) Min. Rolling Diameter with Full Load (mm) Rolling Speeding (m/min)Power of Main Motor (kw)
W11NC-30×2000 30 2000 245 1200 4 22
W11NC-25×2500 25 2500 245 1200 4 22
W11NC-30×2500 30 2500 245 1200 4 30
W11NC-25×3000 25 3000 245 1200 4 30
W11NC-30×3000 30 3000 245 1200 4 30
W11NC-40×2500 40 2500 245 1400 3.5 37

Zhouxiang Group is a specialized hydraulic symmetrical 3-roller rolling machine manufacturer, based in China. Our company also provides horizontal 3-roller rolling machine, vertical diaphragm assembly machine, CNC cutting machine, and more.

Feedback Form
Other Products
  • Mechanical Symmetric 3-Roller Rolling MachineThe W11 series of equipment of our company is mechanical up-adjusting symmetric 3-roller rolling machine. The upper roller moves up and down at the center symmetrical position of the two lower rollers. The vertical lifting of upper roller is achieved through the cooperation of motor, speed reducer, worm wheel and the worm. The two lower rollers are drive rollers and the upper roller is driven roller.
  • Horizontal 3-Roller Rolling MachineThe horizontal 3-roller rolling machine can achieve pre-bending and rolling for plate end through upper roller vertical lifting and lower roller horizontal moving with feeding the steel plate only one time. All the three rollers are driving rollers, which allow for no skidding when rolling the thin plate. Meanwhile, the operation range for rolling steel plate is enlarged.
  • Upper Roller Multifunction 3-Roller Rolling MachineThe three rollers rolling machine can achieve high accuracy pre-bending for end of steel plate. By setting the length of the straight edge freely, the upper roller presses on the steel plate directly to achieve pre-bending. The rolling technical parameters are numerical controlled, which makes the operation easier and enhances the production efficiency largely.