Gantry Box Beam Welding Machine

Home » Products » Steel Equipment » Box Beam Production Line » Gantry Box Beam Welding Machine
Gantry Box Beam Welding Machine

As the special box beam welding auxiliary equipment, the gantry box beam welding machine is designed with gantry structure, bi-side driving and frequency poleless speed-adjusting. Welding tracking is achieved by the mechanical guide pulley device. The operation on right and left sides is conducted through pneumatic control. To enhance the efficiency of fillet weld, the welding mode is double arc double wire and the wire feeder is separate from arc-guide mechanism. The welding flux protective device is available for the gantry box beam welding machine to avoid welding flux scattering too much. The work piece can be placed with fixed mount. It can also be transported on roller conveyer, which can cooperate with the other equipment to form production line.

Technical Parameters
Width of Suited Box Beam Height of Suited Box Beam Welding Speed Speed of Returning Welding Position Power of Main Engine
300-1200mm 300-1200mm 0.17-3.4m/min 6.8m/min Flat Position Welding 9kw

Zhouxiang Group is a gantry box beam welding machine manufacturer and supplier in China. We offer a wide range of products, including long pipe flange welding center, CNC drilling machine, anti-creep welding rotator and more.

Feedback Form
Other Products
  • Cantilever Electroslag Welding MachineThe cantilever electroslag welding machine is the special welding equipment for welding the diaphragm to the surrounding steel plates of box beam firmly with the method of vertical electroslag welding.
    According to the different requirements of users, there are two kinds of electroslag welding modes which are wire electrode and consumable nozzle.
  • Back Welding Machine (Single Arc Single Wire)The backing welding machine is often used before submerged arc welding for box beam. It can avoid high current burning-through the bottom of welding seam. The main manner of backing welding for box beam is single arc single wire. Double arc double wire can also be employed to carry out that welding process. The equipment is mainly composed of lining trolley, welding arm, welding torch mechanical ...
  • Submerged Arc Welder (Double Arc Double Wire)The submerged arc welder is mainly used for submerged arc welding of box beam. It consists of lining trolley, welding arm, welding torch mechanical tracking device, pneumatic system, electric control system, welding flux conveying and recovering system and submerged arc welding power.
    The welding modes are mainly including single arc single wire and double arc double wire.
  • CNC Face Milling MachineFeaturing convenient operation, simple structure and rapid adjustment, the CNC face milling machine is the indispensable equipment of professional welded steel manufacturer. It can mill the work piece with the size of end face ranging from 300×200mm to 1200×1500mm. It can also mill the side face of H steel or box beam. The feed of slipway and lifting of milling head are accomplished through Guangzhou CNC DA98A driving servo motor.